Installing drywall isn't just about slapping the gypsum-board sheets onto the wall studs, then painting it and calling it a day. There's an extra step you have to take between the "slap" and "paint" portions of the project: You have to tape and "mud" the seams between the individual drywall pieces. This will prevent the seams from showing up on the paint job and allow the wall to look like a single, unified piece.
Related posts
Exposed-look ceiling beamsCeiling beams installed on top of drywall aren't always structural. Sometimes they are used to cover drywall seams, providing style as well as function. They can be paint...
Installing drywall is usually one of the last steps in finishing a room after construction is completed. Drywall is the finished surface of a wall that you see before a room is painted. Installing...
Painting a ceiling.Newly finished drywall has to be primed with a special drywall primer/sealer and then painted. If the drywall is left unpainted, it will eventually yellow and discolor. Mix your...
Drywall is a building material that is made out of gypsum and pressed between two thick sheets of paper. It is used for the construction of interior walls. Painting drywall is not a very difficult...
Preparing drywall for painting can be a long, arduous process that most people might leave up to professionals. If not prepared correctly, paint on drywall can appear lumpy, uneven and grainy. How...
