Monday, December 30, 2013

Use Selfleveling Cement

Self-leveling cement typically yields a fairly smooth surface when completed.


Using self-leveling cement for your outdoor projects is an excellent idea, particularly if the area is not going to be subjected to vehicle traffic. Before pouring a walkway or patio, it is typically necessary to ensure that the ground within the area is perfectly level and graded appropriately. Although this is still an important step in the process of pouring cement, it is not always necessary to make sure the surface is completely flat when you are using self-leveling cement. It should still be very close, though, because although self-leveling cement can correct many mishaps in the grading process, it can only cover very small ones.


Instructions


1. Clean and dry approved substrate surfaces. Check the manufacturer's directions to obtain a list of approved substrates.


2. Add 50 lbs. of self-leveling cement powder to 6 quarts of cool water and mix thoroughly at a slow speed with a paddle mixer or shovel until the mixture is smooth. Add more water until the cement is the consistency of pancake batter. Use self-leveling cement immediately, as it cannot be remixed.


3. Pour the self-leveling cement where it needs to be, and smooth it out with a squeegee. Allow the self-leveling cement to dry for at least three or four hours before allowing traffic on the area. The cement is fully cured 72 hours after pouring.








Related posts



    Apply Self-Leveling ConcreteApplying self-leveling concrete is a fairly simple process, although it can go a lot faster if you have assistance. Generally, self-leveling concrete is applied over an...
    Cracks regularly appear in cement walkways, porches and driveways often because of shrinkage in the concrete mixture creating tension that pulls and tears on the structure. It may also be caused b...
    A 6-inch drywall knife is the best tool to use to spread cement on steps.Concrete steps are more durable and last longer than either wood or composite steps. But sometimes concrete does crack and...
    Drywall is pressed gypsum, which is used in modern walls as the surface material. Cement board is also used in the walls of showers and bath surrounds, where there's going to be a lot of moisture....
    Repair Hairline Cement CracksAlthough cement is a durable material, it is not uncommon for hairline cracks to form. These small, thin cracks are usually the result of the cement structure or surfa...