Wednesday, March 5, 2014

Tools For Cutting A Cement Board

Cement board is a type of drywall construction that is designed to go underneath or on the walls of wet areas. It is commonly put down as a subfloor in a kitchen, bathroom or laundry room. Cement board is waterproof and is a composition of gypsum and cement.


Drywall Saw


A drywall saw will cut through this type of board very well. It also has the advantage of helping you to more easily cut holes in the wall. The saw is good for straight edges that meet in corners.


Razor Knife


You can score the surface of the board with a razor knife, and then the unwanted piece can be broken off. A couple of quick passes with the knife, leaving a groove about 1/8-inch thick, will allow you to snap the piece off over a solid surface, giving a clean edge.


Jigsaw


Jigsaws have the advantage of speed and maneuverability. Using a jigsaw will allow you to cut large quantities of the cement board quickly. You can also perform some turns but not extremely tight turns. The jigsaw is a handy tool when remodeling a large room, such as a pool house or mud room.


Dremel Tool


These tools are handheld routers that can be used to smooth rough edges. They also will allow you to make very precise holes in the board for pipes or venting. The dremel tool uses a small rotating bit that resembles a drill bit but that has the cutting edges on the side of the bit.








Related posts



    Drywall is pressed gypsum, which is used in modern walls as the surface material. Cement board is also used in the walls of showers and bath surrounds, where there's going to be a lot of moisture....
    Cement board is a building material much like drywall in appearance. While drywall has a gypsum core, cement board has a cementitious core. Manufacturers make cement board by sandwiching cement be...
    Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board...
    For high-moisture areas, cement board is preferred over drywall. It is made from gypsum and a cement mixture. It is primarily used in bathroom shower and tub areas, and also can be installed on fl...
    Cement rendering is a cosmetic reinforcement solution.Cement rendering is the process of creating a cement mixture and applying it to a wall in thin layers as a finish. The process is used to both...