Friday, March 7, 2014

Tension And Also The Shear Capacity Of The Wall

Certain lumber used in shear wall design provides greater strength and support than other wood species.


Well-designed shear walls are proven to withstand strong earthquakes and hurricanes, according to the Engineered Wood Association publication, "Diaphragms and Shear Walls." Because of shear walls' high strength and shock-absorption qualities, these bearing elements form a crucial part of buildings' shear capacity. The shear capacity represents the building's ability to resist tension (i.e. load) that can cause structural failure.


Function


Buildings must be designed to adequately support lateral loads such as ground movement and high wind force. As these loads are applied to the roof down, shear walls apply tension vertically and transfer loads to the building's foundation. Shear walls act in concert with horizontal structures such as floors and rooftops to resist the shear forces from the applied loads. As shear capacity is reached, the walls gradually yield and absorb the tension throughout their length to prevent the building from collapsing.


Composition


Shear walls consist of cords, metal connectors and the web. The web and cords are held together and attached to the unit via metal connections. Connections play a crucial role in panel design, since loads must find a pathway to the foundation, roof and other elements of the building.


Types


Shear walls are installed as sheathed elements in buildings. These elements consist of wood or lumber, fastener size and the sheathing material itself. Sheathing can be made of cement plaster, fiberboard, plywood or wood lath. The type of sheathing material used for shear walls will impact its shear capacity per foot of length in each segment. Moreover, lumber grades and sheathing materials provide varying strengths. For example, the density of the lumber affects fastener strength. Dense wood species such as Douglas-fir provide fasteners with a stronger hold than less dense wood species such as redwood.


Limitations


Certain shear wall sheathing requires coupling with other materials to sufficiently resist building loads. The Canadian Sheet Steel Building Institute states that gypsum shear walls must be used in conjunction with wood walls in buildings with height limitations due to seismic activity such as earthquakes. This ensures that the building shear capacity can resist tension caused by ground movement and other lateral loads.


Location


To increase tensile strength in the building, shear walls are installed on each floor including the crawl space. Shear walls of equal length should also be positioned along all exterior walls to provide buildings with enough strength and stiffness to support the interior structure, according to the Engineered Wood Association. As long as the strength and stiffness of exterior shear walls are adequate, interior shear walls are not required in buildings where the subfloor's width is approximately one-third its entire length. For instance, a structure with a width of 25 feet does not require interior shear walls unless its subfloor's length exceeds 75 feet.








Related posts



    Shear walls are interior and exterior walls that are designed to ensure the structural stability of a building. They transfer lateral loads down to the foundation, which prevents a building from t...
    A wooden wall possesses both advantages and disadvantages."While wood accounts for 46 percent of industrial raw materials (by weight) worldwide, it uses only 4 percent of the energy required...
    Many commercial buildings are built using the tilt-up wall construction method.Tilt-up construction projects are hard to miss. Massive cranes and crews of workers swoop in to a site, and before yo...
    Like wood stud walls, metal stud walls consist of upright framing members joined at the top and bottom to horizontal framing members.Although generally more expensive than wood, steel framing syst...
    Walls include many elements, which are carefully planned by a construction team.Wall sections are small-scale drawings designed to show builders how walls should be constructed. Wall section drawi...