Use a gentle approach when removing baseboard trim.
Removing baseboards is necessary when you install new flooring, wainscoting or simply want an updated look. The process of removing baseboard trim from plaster walls can lead to unnecessary dents, holes or loss of wall plaster if you do not use the right tools and technique. With a slow and gentle approach the damage is minimal and most times the baseboards can be reused.
Instructions
1. Run a utility knife along the top of the baseboard in the seam created by the wall and the baseboard. Score several times through the caulk or paint with light pressure instead of one heavy score. The angle of the knife should be such that it does not cut into the plaster wall, but into the seam.
2. Locate the position of the wall studs by using a stud finder tool. Start at the stud closest to the end of the baseboard. Position the edge of a stiff putty knife on top of the score line and gently tap it with a hammer to begin separating the baseboard from the wall.
3. Insert a pry bar into the gap and gently tap it with a hammer. Place a piece of scrap wood above the baseboard and behind pry bar. This helps provide leverage and prevents you from denting or making holes in the plaster walls.
4. Separate the baseboard from the wall gently and take note of where the nails are located. Position the pry bar as close as possible to the nails when you pry the baseboard away from the wall.
5. Work your way down the length of the baseboard. With one hand on the pry bar and the other gently pulling the baseboard, continue to separate the baseboard from the wall one nail at a time.
6. Tap the molding back in toward the wall if a nail is stubborn and refuses to come out with the baseboard. This usually exposes the nail head allowing you to remove it with a pair of pliers. If you use a claw hammer, make sure to place a scrap piece of wood underneath it to protect the molding.
Related posts
Plaster walls are built to last and taking them down takes time, too.Plaster walls are constructed to last for a very long time. The plaster is smoothed over a backer board by hand, and once it ha...
Wall anchors allow builders to mount shelf hardware into hollow, plastered walls.Although builders can install plaster or stucco over solid walls, such as concrete block walls, most plaster adhere...
Plaster walls require a certain amount of care that many other walls don't usually need. Small wooden slats are connected to wall studs and then layers of plaster are spread over the slats to form...
Installing a cabinet on plaster walls can prove to be difficult, depending on the makeup of the structure beneath the plaster. The plaster wall itself is not strong enough to support the weight of...
Plaster walls are common in old houses or buildings that were constructed before the advent of drywall. Drywall is preferred in modern construction projects because of its durability and easy inst...
