Use a Drywall and Panel Hoist
The hardest part of hanging drywall is lifting the panels. Although they are not heavy, they are awkward and fragile. To hang drywall on ceilings, many professionals use a tool called a panel hoist, or drywall lift. Drywall lifts are available for rent at many hardware stores and tool-rental outlets. Although it is possible to hang drywall with a lift by yourself, having an extra hand around will make it easier, so ask a friend to help you out for the day.
Instructions
1. Assemble the lift according to the manufacturer's instructions. Test each moving part to ensure it is functioning correctly. For example, crank the winch to make sure the lifting cables are moving freely, then test the wheels to ensure the safety locks work properly.
2. Clear the floor of any debris or tools that might get in the way of the lift. Roll the lift directly under the location where you will be placing the drywall panel.
3. Measure and cut to size the drywall panel you wish to install. To cut drywall, score it with a utility knife and then snap it at the score line.
4. Extend the load rails on the lift. These are the horizontal bars that help support the drywall panel.
5. Tilt the lift so that the support hooks (the curved metal hooks that hold up the panel) are ready to receive the drywall panel.
6. Set the wheel brakes to keep the lift from sliding away from you.
7. Lift the panel and place it face down on the lift. If possible, ask someone to assist you. Otherwise, carefully lift one end and place it on the hook, then repeat on the other side. The edges of drywall panels break easily, so move slowly.
8. Crank the winch to raise the panel into position. The lift will angle itself back as the drywall panel comes into contact with the ceiling, which will cause the drywall panel to lay parallel to the ceiling, allowing you to attach the drywall.
9. Attach the drywall by installing drywall screws every 6 to 8 inches.
10. Lower the winch when you finish.
Related posts
Drywall offers a smooth surface for slanted ceilings.Not all walls are vertical. If you're finishing out an attic loft or a vaulted ceiling, your walls may be slanted. Gable roof lines create inve...
Save money and stress on your shoulders by building your own drywall hoistHanging drywall on a ceiling can be a lot of work for two, three, or even four people. A drywall hoist makes for an easier...
Steel frames are quickly becoming more popular in new home construction. Steel frames are more resilient to treacherous weather conditions, especially in hurricane and tornado-prone areas of the w...
Installing drywall on a gable ceiling requires a drywall lift.Drywall panels are composed of pressed gypsum particles and covered with paper to provide a smooth surface for walls and ceilings. Sol...
Drywall can mask the sight and sound of ductwork.Never hang drywall directly on heating ducts. Ductwork cannot carry the load of a wall.It's also critical to keep ductwork as airtight as possible...
