Thursday, October 10, 2013

Install Vinyl Ceiling On Vertical Rafters

Installing vinyl ceiling panels on vertical rafters requires starting at the top and working down.


Vinyl ceiling panels are usually installed on horizontal rafters. Installing vinyl ceiling panels on vertical rafters requires starting at the top and working down. A straight and level starter strip that is securely nailed in place is a must. Rafters or furring strips used for nail locations should be spaced no further apart than 16 inches.


Instructions


1. Nail in place the vinyl J-channel trim on both sides and the bottom of the ceiling area. Placing J-channel trim along the top is an option. It is used on the top for appearance only.


2. Place a horizontal, level chalk line at the location of the starter strip across the top of the ceiling area. Nail the starter strip next to the line and make sure the line is level.


3. Slide, pull and snap the ceiling panels into the groove of the starter strip and nail in place. Each panel's edge also snaps into the matching groove of the preceding panel. Do not nail each panel tight. Leave the nail head sticking out at least 1/8-inch above the panel. Each panel should easily slide from side to side to allow for expansion and contraction as the temperature changes. Leave ¼-inch space on both sides between the end of the panels and the J-channel for the same reason.


4. Use painted aluminum nails to attach the last ceiling panel at the bottom. Place the nails into the lowest part of the grooves in the ceiling panels, or hide them behind the J-channel on the bottom.








Related posts



    Install 4 X 8 Ceiling PanelsAcoustical ceiling tiles will insulate, provide noise reduction both in and out of the room, eliminate echos and give your ceiling a brand new look. If you want to get...
    Vinyl siding is a popular, durable building material that can provide your home with an attractive and low maintenance finish. Mounting vinyl siding to a block house requires first mounting furrin...
    You can install suspended ceiling grids.Hanging drywall for ceilings can be a very difficult and daunting task. A good alternative is doing a suspended ceiling. Areas like a basement, where water...
    Drop ceilings consist of a metal grid that is suspended from the ceiling (or upper floor) joists of a building. The grid system allows for a level ceiling surface even if the original ceiling supp...
    If you have a drywall ceiling that is showing signs of damage, such as cracking, holes or water damage, a new ceiling can be installed on top of it. While it is preferable to remove the old drywal...