If you are installing drywall, you need to buy some joint compound. It is perhaps the most important part of your installation. The joint compound is commonly called mud, and it is used like plaster to fill in the cracks between sheets of drywall once they are hung. The compound is made of a mixture of materials, including limestone and water, and designed to be creamy for easy application.
The Facts
Joint compound can be made of water, limestone, ethylene-vinyl acetate polymer, expanded perlite and other chemicals. The whole idea behind the compound is to create a smooth surface that bonds with drywall paper and seals the small cracks that occur between two sections of the drywall when it is hung. It comes in several varieties for different applications, including heavy and lightweight.
Identification
Joint compound comes in several varieties for different applications. The most popular is lightweight ready mix joint compound, which can be considered as all-purpose and is suitable to use in the home. It is premixed, very soft and feels like clay. It smells a little bit like moth balls and wet cement and is cold to the touch. Other varieties include heavy duty mixtures and water soluble compounds that can be mixed on site.
Features
Joint compound is very smooth so it takes little effort to apply it in large quantities. It can be worked into very small cracks and holes and fills in the drywall seam to create a very even, false surface over the seam. Though it is smooth, it will dry into a very hard shell. If you tap a dry section though, you will notice it is not as hard as regular wall plaster.
Function
Joint compound creates a very true and flat surface. It can be carried on site and applied right from the bucket with no mixing required. It is designed to finish your wall, just like plaster, but it fits between the two drywall slots. Drywall sheets taper at the ends to accommodate the joint compound so there is no bulge in the wall. Many people also use it to fill in small nail holes in their walls, but this is not the proper usage. Drywall joint compound is best used as a plaster. Since it is so smooth, it will not fill a hole properly, but it will create a smooth skin over it. Spackle is a better choice for filling in holes.
History of
Joint compound has been used in North American for several decades. Prior to its wide-spread use, other types of plasters were used. In colonial times and as recently as 1960, slat boarding, or small thin strips of wood, were applied to walls, then plaster was slathered on top of them with a large trowel and left to dry. Similar plasters have been in use for centuries for building walls and other decorative applications. Since the ancient times plasters have been used to cast molds, create vases and finish walls.
Related posts
About Drywall Joint TapeDrywall contractors commonly use large gypsum panels in the construction of interior walls. These panels provide a smooth surface for painting or applying wall covering, af...
Joint tape is used as part of a drywall installation. It's applied along the seams of two adjacent drywall sheets. The reason is mainly to seal the small gap created by the seam and create a smoot...
Finishers use all-purpose joint compound to repair walls and ceilings.All-purpose joint compound is a building material drywall finishers use to spackle, or mud, a drywall installation. All-purpos...
Drywall finishers use flat drywall knives and joint compound to cover the places where different boards of drywall, or sheetrock, intersect. A rough or uneven application of joint compound shows t...
Spackle is convenient as a quick-fix option for drywall damage.Spackle is a repair and patching compound that is used primarily on drywall, but also can be used in wood and plaster. Joint compound...
