Drywall screws are available in a variety of sizes and styles, and can be used for metal stud or wood stud applications when hanging drywall. Metal stud screws have a self-drilling head which allows them to penetrate into metal, while wood stud screws feature a sharp point, which allows them to sink into the wood with little effort. All drywall screws feature a Phillips slotted head, which ensures a better grip between the drill bit and the screw. An electric drill will be required to insert the screw in all applications.
Stud Location
Locate the studs underneath the drywall surface by using a stud locator, tapping on the wall with a hammer to locate a solid object or making a small hole in the wall with a screw or nail. Studs are commonly spaced 16 inches apart in framed walls.
Insert the Screw
Place the drywall screw's slotted head onto the Phillips end of the drill bit. Place the sharp tip of the screw against the wall where the stud is located. Press on the back end of the drill so that the screw tip sinks into the surface. Next, start the drill. As the screw sinks in, make sure it doesn't rip the surface paper of the drywall. The paper provides a protective barrier for the material of the drywall and should be kept intact if possible.
Fill in Holes
Place a small amount of spackle onto a trowel blade. Place the blade flat against the wall by the screw, spackle side down. To create a smooth wall surface, sweep the trowel across the hole so that the spackle fills any indentations that the screw has made.
Sand and Paint
Let the spackle dry according to the manufacturer's instructions. Once it's dry, use finish-grade sand paper to smooth the spackle so that it matches the finished surface of the drywall. You may need to spackle and sand the hole more than once to replicate a finished surface. Once the sanding process is complete, wipe the wall with a cloth to remove dust and debris. Finally, paint the wall using your color of choice.
Related posts
These stainless steel, flat head wood screws are used with either a slotted or a Phillips head screwdriver.Hundreds of different types of screws can make figuring out which one to use for a partic...
Not all screws are suitable for hanging drywall panels.Drywall panels offer a smooth wall surface after you fill and smooth the seams with joint compound. During the installation of the panels, yo...
Hanging drywall on metal studs is very similar to hanging it on wood studs.Metal studs offer several advantages over wooden studs for wall construction. They are lighter than wooden studs, making...
Drywall boards attach to the wood frames of interior walls and ceilings. To attach drywall, workers use special drywall screws. A popped screw refers to when a screw emerges over time, presenting...
Set screws no more than 1/8 inch below the surface of drywall.Drywall provides an excellent wall surface with its smooth, flat exterior and its pressed gypsum core that increases a room's insulati...
