Monday, July 15, 2013

Frame A Concrete Patio

Patios are fun


Installing a concrete patio is a moderately easy task, and can add value and utility to your home. The project has two parts. The first part is framing the patio, which is a moderately simple task. The second part involves the actual pouring, placement and finishing of the concrete. Concrete finishing is as much an art as a trade skill, so you are advised to seek out experienced finishers for the final finishing work on your patio.


Instructions


Grade Soil


1. Dig Footings


Level the soil. The soil must be solid enough to support the weight of the concrete. Grade the patio area to a level 4 1/2 inches below the finish slab height at the house. The soil should be graded to allow about 1/4 inch to the foot (1 percent) fall-away from the house on the final concrete surface for water drainage.


2. Build Forms


Mark out the perimeter of the slab, including the side against the house, using your twine and chalk. Using the square blade shovel, dig 12-inch by 6-inch footings at all edges of the slab to prevent edge breakage.


3. Set Forms


Nail together the two-by-eight boards to form a box around the perimeter. Line up the inside face of the form with your layout twine, which should be placed on batter board or offset stakes (see picture above). Drive one-by-two stakes vertically behind the form boards at each corner and every 4 feet using the twine to keep the boards straight.


4. Brace Forms


Set your layout twine with a 1 percent fall-away from the building. Then nail your forms to the stakes at the twine level. This will provide the necessary drainage.


5. Drive one-by-two stakes at a 45-degree angle behind the form board at each corner, each splice of boards and every four feet using the twine to keep the boards straight. Place temporary kicker stakes inside the forms to keep the forms braced until the concrete is poured. Place 1/2 inch of rebar top and bottom in the perimeter footing hung off the form boards on tie wire.








Related posts



    Concrete StepsConcrete stairs are framed as a box or mold for the concrete. The frame is generally constructed of 2-inch nominal framing lumber cut to size, leveled, braced and reinforced in place...
    Colored concrete step extension.Concrete stairs are an easy way to extend steps from a house where old steps need to be replaced or upgraded. The old structures must be completely removed. The new...
    You can add a painted concrete faux-finish.Many people choose to add pigment to their concrete before pouring patios and porches. But if you already have a plain, gray concrete patio cured in plac...
    Concrete is a versatile patio flooring material.Concrete is used in many building and construction designs, especially patios. It produces a hard, durable surface or clean, smooth edging and can b...
    Adding space below a concrete ceiling is essential for soundproofing.Soundproofing a ceiling generally involves the addition of insulation and drywall to add mass to the ceiling and block the flow...