SCL products are strong and consistently reliable.
The popularity of structural composite lumber (SCL) is a result of the efficiency, strength and predictability of this manufactured wood product. By using adhesives and heat to press thin layers of treated timber together through the SCL development process, a manufacturer is able to uniformly distribute defects in the lumber, resulting in a consistently strong product.
Laminated SCL
Used most often by builders, laminated veneer lumber (LVL) is the most popular SCL on the market. As noted above, structural composite lumber is developed by gluing and pressing thin sheets of wood together. The LVL product laminates each of the sheets with the grain lengthwise prior to gluing and pressing. The result is an extremely stable wood often seen in overhead beams and joints.
Parallel Strand Lumber
Builders that want a wood with similar properties to LVL will often use parallel strand lumber (PSL). As with laminated veneer lumber, PSL also applies a veneer to the wood sheet during the SCL manufacturing process. The distinction is the sheets are glued and pressed together with the grain crosswise, as opposed to lengthwise for LVL. Also used for beams, PSL is noted for its bending strength, which is why longer beams are quite often PSL products.
Laminated Strand Lumber
Connecting pieces for joists and beams are often a type of structural composite lumber called laminated strand lumber (LSL). While LVL and PSL sheets are manufactured by "peeling" the wood, as if on a large lathe, strand lumber actually slices the log into strands that range from about 3 inches to 12 inches. The strands are then dried, pressed and glued together to form SCL. LSL uses strands about 6 to 12 inches long.
Oriented Strand umber
Like laminated strand lumber, the manufacture of oriented strand lumber (OSL) begins by cutting logs into strands, drying and then gluing and pressing them into OSL. The only distinction between the two types of strand SCL is the length of the strands used in their manufacture. OSL uses smaller strands, up to about 6 inches long. As with LSL, oriented strand lumber is usually used in building applications requiring joints or connectors.
Related posts
There are many types of wood floor underlayment available, and they each have differing properties that affect the proper use of the product. The most common types of underlayment include plywood...
Uranium is radioactive and often used to produce nuclear energy.Uranium is a dense metallic naturally-occurring element that is radioactive. Uranium is mined for many different purposes, including...
Stud walls are popular with builders, but there are several types.The use of stud walls for constructing houses and other buildings has been around for over 200 years. It's basically a structure w...
Steel wall studs can replace most wood studs.Standard wall studs are 2x6 strips of wood. Modern engineering has developed steel replacements for most walls. Metal wall studs are used most frequent...
Plywood is one type of wood you can use as an underlayment.Whether you're laying tile, laminate, carpet or another type of flooring, you'll need to put a layer of underlayment underneath your floo...
