We've all had the problem of a screw getting pulled right out of a hole and stripping out the wood that should be holding it. Maybe the kids swung on a gate and pulled the hinge screws out or a cupboard door was swung too wide and the screws pulled right out. Well, however it happened, you now need to fix that stripped out screw hole before you can reattach what has come loose. Here's a few ideas on how you can fix your stripped screw hole.
Instructions
1. Start with the obvious option. Consider using a slightly longer or wider screw. For example, if the stripped out screw was a #6, try replacing it with a #8. If the screw was 11/2 inches, try using a 2-inch screw to replace it. The longer or wider screw may be able to bite into fresh wood and hold solidly.
2. Fill the hole and start over. You've got all kinds of options for filling the hole, but three good (and easy choices) are wooden matches, toothpicks or cotton batting.
3. Coat the matches or toothpicks with carpenter's glue and insert enough of them into the hole to fill it up. Allow the glue to dry (a couple of hours), then cut them off flush with the surrounding wood and sand smooth.
4. Using cotton batting, soak it in carpenter's glue and stuff as much as you can right into the hole. Pack it in tightly using the tip of a small screwdriver. Let it dry (this one needs to dry overnight) before proceeding.
Use an awl or small drill bit to drill a pilot hole in your repair and then install your new screw.
5. Alternatively, use a pencil sharpener to make a point on a wooden dowel. Dip the sharpened tip in carpenter's glue and jam it well into the hole. Cut the dowel off close to the wall, then let the glue dry. Again, use an awl or small drill bit to make a pilot hole and install your new screw.
6. Got a large hole? You can repair these with wooden dowels. Drill out the hole to the size of a wooden dowel (1/4 inch, 3/8 inch, 1/2 inch). Dip the end of the dowel into carpenter's glue, then put it into the hole and let it dry overnight.
7. Cut the dowel off flush, sand the area smooth, make a pilot hole and install your new screw.
Related posts
A hole saw is a kind of bit that attaches to you power drill and cuts different size holes in any surface, including drywall. It looks like a cup with teeth around the rim with a regular drill bit...
Hang pictures securely on plaster wallsHomeowners and decorators install screw eye hooks in walls to hang pictures and other decorations on walls. A screw eye hook resembles a traditional screw at...
If you want to hang something from a wall or ceiling but need some extra support that a standard screw or nail won't provide, you can use a screw hook. A screw hook looks exactly like it sounds. I...
Here's an assortment of tips you may find helpful when repairing holes in drywall. From small holes to larger ones, the methods vary, and we will explore tips for repairing a variety of sizes to h...
Drywall screws have coarser threads than regular wood screws.You can nail or screw drywall to studs and rafters. Regular screws and nails won't hold the paper-coated gypsum product, which the comp...
