Will Regular Drywall Screws Work With Metal Studs?
Steel studs have many advantages over wooden ones. They are lighter, easier to store and assemble and are ready-cut to length. They are used most often in the construction of office and apartment buildings. While there are special screws designed to bind drywall to metal studs, you can use ordinary drywall screws just as easily. There are some things you should remember, though.
Support the Stud
Some metal studs are three-sided, so it is possible that the pressure of the screw may cause the face you are screwing against to be pushed back, making it difficult for the screw to bite. To avoid this, you may have to insert a small temporary block or hold the stud against the drywall as you are screwing. This is usually only a problem for the first screw. Once that one is in, it will hold the drywall firmly against the stud for subsequent screws.
Use Enough Force
The key to getting the screw to bite is in the amount of force you use. If you push hard enough, the screw will sink quickly, If you don't, however, it will just spin in place, possibly creating a hole so big that it won't hold the drywall even if it does eventually sink. Be careful when pushing hard on the screw, though. Building codes for drywall screws require them to be sunk into the drywall without breaking the paper.
The best way to ensure this result is to use a screw gun with an adjustable setting. When set correctly, the gun will disengage when the proper depth is reached, so you can push as hard as you want without damaging the drywall. If you have to use a regular drill, practice first with a scrap piece of drywall.
Drywall Screws for Metal Studs
If you opt for screws designed specifically for metal studs, you will find that they are available with a finer thread than regular drywall screws and come with either a very sharp point or a fluted end, much like the end of a drill. The fluted screws bite faster and don't require as much force. This is probably the best choice for someone with limited experience with a drill.
Related posts
Hanging drywall on metal studs is very similar to hanging it on wood studs.Metal studs offer several advantages over wooden studs for wall construction. They are lighter than wooden studs, making...
Nails won't hold drywall to steel studs.Builders frequently frame new walls in commercial buildings and apartments with steel studs. These studs are lighter than wooden studs, which is important i...
Use metal studs.Builders have been using wooden studs to build frames and put up walls for many years but now there is another option. Stainless steel studs are becoming more and more popular than...
Not all screws are suitable for hanging drywall panels.Drywall panels offer a smooth wall surface after you fill and smooth the seams with joint compound. During the installation of the panels, yo...
Hang a picture exactly where you want it.Nails won't work when hanging pictures on a metal stud. You will need a fine steel-plated self-drilling screw 2 to 3 inches long. A normal Phillips drywall...
