Thursday, August 15, 2013

Cut A Plaster Ceiling

Use the correct technique to easily cut a plaster ceiling.


Cutting a plaster ceiling becomes necessary when damage occurs from an accident or water leak. Plaster, a concrete-like mixture is a very hard, tough and durable surface that makes cutting, without cracking and breaking, difficult. Removing a section of the plaster ceiling, without damaging the rest of ceiling, is possible if you use the correct technique.


Instructions


1. Wear safety glasses, dust mask, hardhat and gloves to avoid an injury and plaster dust inhalation.


2. Determine if lath is under the plaster. If so, drill only shallow holes or make only shallow cuts so as not to damage the lath, which are thin strips of wood used as a gripping surface for plaster.


3. Drill a series of holes with the largest drill bit available, spaced 1-inch apart, through the plaster, around the damaged area. Drill in straight lines to square off and frame the section. Insert a hole saw into the first hole and saw to the second and subsequent holes.


4. Cut through plaster using a circular saw with a masonry carbide blade. Draw straight pencil lines on the ceiling; follow the guidelines with the saw.








Related posts



    Applying mortar over thin pieces of wood, known as lath, creates a hard, one-piece ceiling without seams or joints. Accidents or attempts to access the area above the ceiling causes holes in the m...
    If you own an old home (at least 80 years old), it’s likely that your interior walls are plaster rather than drywall. Plaster walls are beautiful, durable and far more soundproof than m...
    Repairing ceiling drywall damage appears daunting, but have no fear, fixing ceiling drywall ceiling damage is relatively easy. You only need a few tools to repair cracks, holes, nicks and gouges....
    Plaster ceiling medallions were originally designed for use with chandeliers.Plaster medallions were originally created to protect ceilings from burn and smoke stains in candle-filled chandeliers....
    One of the trickier parts of doing your own electrical work is getting the wire from point A to point B. Quite often, there are obstacles in the way and more times than not, a floor or ceiling to...