When pipes or ductwork must be hidden, a common solution is to "box" them in. This means that a wood framework is built around them, which is then covered in drywall. After that, finish the drywall with tape and joint compound to prepare the surface for paint. To do so, you will need some basic drywall tools and supplies, all of which are inexpensive and available at most building-supply stores. After that, it's just a matter of installing corner bead on the exterior corners and then embedding tape over the joints.
Related posts
Painting a ceiling.Newly finished drywall has to be primed with a special drywall primer/sealer and then painted. If the drywall is left unpainted, it will eventually yellow and discolor. Mix your...
Fiberglass drywall tape is used for covering the joints between drywall panels. The major benefit of fiberglass drywall tape is how easy it is to install. Because it is self-adhesive, fiberglass d...
Here's an assortment of tips you may find helpful when repairing holes in drywall. From small holes to larger ones, the methods vary, and we will explore tips for repairing a variety of sizes to h...
Apply drywall compound over fiberglass mesh tape to repair drywall corner bead.Drywall corner beads are prone to cracking. The outside corners are exposed to everyday abuse. Eventually you may not...
After installing the drywall, these walls will be structurally sound.From the look of its scant metal appearance, you might not be able to tell that aluminum C has a comparable structural strength...
