Spackling drywall can be a messy job, but the result will be smooth walls.
Spackle is a gypsum-based product that is used to conceal imperfections in drywall. It is applied on walls in thin layers that are feathered out from the imperfections and sanded smooth with the wall. While spackling is not difficult, it does require patience and attention to detail. Many imperfections such as holes, dents or joints will required two to three coats of spackling compound with sanding between each coat. Spackling drywall is a dusty job. Be sure to cover doorways and furnishings in the room where you are working to avoid damage and clean-up.
Instructions
1. Scoop spackling compound into a spackling tray with a putty knife. The spackling tray will allow you to have quick and easy access to the compound when working on the wall.
2. Select a putty knife based on the size of the repair. Small pin or tack holes can be patched using a small knife while larger holes and joints between drywall panels will require a wide knife. The process is essentially the same to fix both large and small issues on walls.
3. Apply a moderate amount of spackling compound to the edge of the knife and drag it across the surface of the wall over the area in need of repair. Spread the compound so that it is thick over the area in need of repair and thins or feathers out around the surrounding area. This will help conceal the repair. If needed, go over the area where you applied the spackling compound and smooth it out. Allow the compound to dry overnight.
4. Sand the spackled area with the medium-grit side of a sanding sponge. Turn the sponge over and continue sanding with the fine-grit side. Rub your hand over the wall without looking at it. If you can feel imperfections, you will need a second coat.
5. Follow the same procedure in Steps 3 and 4 to apply and sand additional coats of spackling compound until you can no longer feel imperfections in the wall. The wall is then ready for paint.
Related posts
Standard spackling tools professionally repair a small hole in drywall.Drywall is a strong, durable wall covering that creates a smooth finish to the wall. Although the strength and longevity of d...
There are a lot of problems that can make you need to repair drywall. A patch will make the difference in most cases. Sometimes you will have to use extra wallboard to complete the task, and somet...
Repair a Drywall CrackDrywall cracks can occur for any number of reasons. Over the years homes begin to settle sometimes causing cracks around the corners of doors and windows or where columns sup...
Splits occur in drywall seams when shrinking house frames cause poor workmanship or insufficient covering to break at the weakest point. Seams are blocked with a special paper tape and then covere...
Purchasing drywall repair supplies is nearly always cheaper than hiring a repairman.The cost of repairing drywall depends largely on the size of the crack or hole in your wall. To repair a large h...
