Cover old brick fireplaces with sheetrock for a more modern feel.
Many people are confused about the difference between sheetrock and drywall. The truth is, there is no real difference. Different companies that produce the same product prefer one name or the other. Both products are primarily constructed of fine, compressed gypsum faced with thick paper on both sides. Alternately, a product made of fiberglass and marketed under both names is mold- and mildew-resistant. This is the correct choice if your fireplace surround is in a humid area.
Instructions
1. Place a ¼-inch bit on your drill. Drill 3-inch-deep holes all over the surface of the fireplace, along mortar lines if you have them. Work vertically and then horizontally so that you have an even grid of holes across the entire face.
2. Hammer a ¼-inch cedar plug into each drilled hole. The tops of the plugs must be level with the existing surface of the fireplace surround. Attach spruce straps horizontally over the whole fireplace surround, using 2-inch drywall screws and sinking them into the wooden plugs.
3. Follow the mortar lines with the edges of the straps, if applicable. The new wooden facing of the surround must be smooth and level all over. Cut 5/8-inch sheetrock to size with a drywall saw and attach it over the spruce strapping with drywall screws.
4. Cover the entire surround with sheetrock. Keep the vertical and horizontal seams aligned everywhere. Apply joint compound thinly along each seam with a putty knife and cover each seam with appropriate lengths of joint tape. Allow the seams to dry overnight.
5. Apply mud to the entire surround smoothly and evenly with the putty knife; be generous with the drywall mud so that all of the seam work and screw holes are covered. Sand any rough or uneven areas lightly with fine-grit sandpaper and paint or finish the surround as you wish.
Related posts
Remodel Fireplaces With SheetrockHomeowners often choose to cover fireplace surrounds with gypsum drywall, commonly referred to as "sheetrock." For some homeowners, it is an inexpensive...
Sheetrocking of a brick fireplace can be accomplished by anyone.Drywall finishing is a unique skill, but can be accomplished by anyone with enough time and patience. Moreover, if you are able to f...
Smooth drywall seams are the goal.What the construction industry calls mudding is a simple task if you prepare. The drywall or sheetrock seam is taped then drywall mud, which is a joint compound,...
Stained sheetrock should be primed and re-painted.Sheetrock, or drywall, is the preferred material today for covering walls and ceilings (as opposed to the old-fashioned approach of plastering). W...
Sheetrock (another word for drywall) is compressed gypsum made into wide flat sheets and covered with paper. It can be used to form walls and ceilings. Unlike plaster, drywall doesn't crack. If cr...
