Foam sculptures can be used in a variety of ways, such as props in school plays to creative advertising purposes. There are unlimited creative possibilities when following the basic steps of make foam sculptures.
Instructions
1. Transfer your sculpture pattern to the foam with a black marker by drawing freehand or using an overhead projector to project an image to trace. For smaller projects, print a pattern out on a printer, pin the pattern to the foam, and trace over the lines in the pattern leaving an indention. If you are carving a three-dimensional sculpture, remember to trace all sides.
2. Use a foam carving tool, such as a sculpting tool, freehand router or hot knife, to create the shape of the sculpture following your pattern. Use small movements to shave away foam, creating the initial shape
3. Use sandpaper to lightly smooth the surface of the foam sculpture.
4. Use a foam engraving tool to create detail in the sculpture. Hold the engraving tool as if you were drawing with a pencil. Generally, only the tip of the tool heats up.
5. Use foam glue to glue any separate pieces of foam to the main sculpture. For example, you may wish to glue a small, foam nose to a larger foam face. Insert toothpicks through the small foam pieces to hold in place until the foam glue dries.
6. Apply a sealant to create a hard surface. Allow the sealant to dry for 24 hours.
7. Apply a base color (such as white or yellow) of water-based acrylic paint to the entire sculpture. Allow the paint to dry for 24 hours.
8. Paint the sculpture with water-based acrylic paints. Allow the paint to dry for 24 hours.
9. Apply a foam finishing coat by painting or spraying to achieve the finished product. Allow the finishing coat to dry for 24 hours.
Related posts
A sculpture made with cement can last a very very long time. You can make a cement sculpture for indoor or outdoor use. They are sturdy, and the natural looking finish can complement many decor st...
Large plaster sculptures require a wire armature and take a lot of planning and skill to get just right. When you are building your first plaster sculptures, however, you should keep it small. Tha...
Plaster of Paris is a material commonly used in crafts to create molds, sculptures or imprints. In its natural state, plaster of Paris is a fine white powder composed primarily of gypsum. When wat...
Wooden sheaths have long been used as a secure way to hold a blade.Knives are useful tools, and a solid sheath will allow you to carry a knife around safely. Sheaths can be made of various materia...
A drywall trowel is used to apply plaster to create a faux stone wall.Avoid the cost of real stone by using a faux finish technique to create the look of aged stone and rock. Apply light-weight jo...
