Doing a job quickly and efficiently is the key to a cost-effective drywall installation. If the drywall is not correctly leveled horizontally or vertically it could lead to time-consuming issues. A self-leveling laser will allow you to quickly make perfect lines for drywall installations. These lasers are designed to level themselves while allowing the user to see both vertical and horizontal lines. The laser lines are then visible in any unobstructed direction allowing the installer to use them as a leveling point when hanging drywall.
Instructions
1. Locate an area in the room that will allow the laser to have an unobstructed path to the area in which drywall is being installed
2. Set the laser up in the determined area. Setting up the laser could include attaching it to a tripod, placing the laser on the floor or attaching the laser to a stud or door jamb with the use of a bracket.
3. Determine if the horizontal or vertical laser will be used. Locate the power buttons at the side of the level and press the correct one. In some cases, both lasers will be needed to install drywall and can be turned on simultaneously.
4. Check the laser line to make sure it is a solid line and isn't blinking. A blinking laser line means that the self-leveling action on the laser is not able to correctly level itself and needs some adjustments to correct the issue.
5. Locate the laser line on the studs of the wall and make visible marks as needed to install the drywall correctly.
Related posts
Self-leveling floor compounds provide an easy way to achieve a clean, level floor over old concrete, gypsum or portland sub-floors and some wood substrate floors. Before you apply a self-leveling...
If you are going to tile or otherwise cover a concrete floor in your home and the surface is generally in good shape but contains some dips, depressions, holes or cracks, you need to get it filled...
Without a level sub-floor, the finished product won't look rightConcrete sub-floors are notorious for having bumps and ridges, while wooden sub-floors can often be twisted out of shape by settling...
If you have a circular stairwell, the area underneath it might look chaotic, forming some strange shape and seemingly impossible to drywall. However, with a little effort you can determine where t...
Nails won't hold drywall to steel studs.Builders frequently frame new walls in commercial buildings and apartments with steel studs. These studs are lighter than wooden studs, which is important i...
