Friday, March 1, 2013

Finish Vinyl Sheetrock Inside A Rv

Painting is a good project to allow children to help.


Vinyl-covered sheetrock in mobile homes can present problems when deciding to paint or refinish. The slick and usually textured surface requires careful preparation to get a satisfactory finish. With this type of sheetrock, you cannot just roll on a coat of paint; it will lift and peel off the surface. Texture paint camouflages damaged sheetrock, covering small scratches and gouges. Faux finishes also work well to cover vinyl sheetrock.


Instructions


1. Remove the batten strips and pull any nails remaining in the seams of the sheetrock. Wash the walls with a strong cleaner (trisodium phosphate) or ammonia and allow the walls to dry.


2. Fill the openings between the sheets of vinyl sheetrock with drywall compound and allow to dry. Drywall compound shrinks when it dries, some areas may require a second coat. Sand the walls with 100-grit sandpaper to roughen the finish. Use light pressure on the sand paper to avoid damaging the surface of the sheetrock. Use a sanding pole to make this part of the project go faster. Wipe the walls with a tack rag to remove any sanding debris.


3. Roll on two coats of a high-quality sealer primer; choose one specific for vinyl. Check the walls after the first coat of primer for any rough areas that require more sanding. Use a primer tinted to the color of the paint to ensure better coverage.


4. Roll on two coats of a premium paint, allowing drying between coats. Some patterned sheetrock may require a third coat if the pattern still shows through the paint.


5. Hide damaged vinyl sheetrock by rolling on a textured paint, using a long-napped wool roller. Foam rollers are available that have designs carved into them.


6. Create a stucco finish on the vinyl sheetrock by rolling on textured paint and then using a trowel or drywall knife to create swirls in the paint.



Related posts



    While some spend thousands refinishing their vinyl Sheetrock with tile or wood paneling, frugal do-it-yourselfers opt to apply a finish coating. If you rank with the latter, learn the proper way t...
    Mobile homes generally come with walls that are made of vinyl panels. These panels are attached to the walls, and the seams in between them are covered with strips. If you would prefer your walls...
    Mobile homes generally come with vinyl paneled walls instead of sheetrock, unless you pay extra. There is no real reason you cannot have thicker sheetrock walls and it will increase the value of t...
    The fake paneling drywall in a mobile home requires a few special painting and prep techniques.Fake paneling drywall may look attractive when it is brand new and offer a cheaper alternative to rea...
    Create a rustic-looking decor by applying stucco texture to your Sheetrock walls.Stucco-textured Sheetrock walls are an effective method to obtain an old and rustic look for your home's decor. Ess...