Make Plaster
Body Molds
Plaster body molds are indispensable for artists and sculptors who need to work from a realistic perspective. They can be used for reference, but often times they become a piece of the actual artwork, saving the sculptor the time and effort of carving or fabricating the body part from scratch. The process in not exceptionally difficult, but it is rather time consuming, and requires an exceptionally still model, so keep this in mind as you begin.
Instructions
1. Grease your model with a thick, heavy coating of petroleum jelly. If you do not coat the skin with petroleum jelly, you will pull out your model's body hair when you remove your mold. It will also be more difficult to remove your mold, and can cause cracking and breaking. As plaster dries, it creates a fair amount of heat, so make sure your model is aware of this before you begin. Petroleum jelly also helps protect the skin from the heat.
2. Fill a pan with warm water and set it close to your model. Have your model move to the desired position. Note that this process takes some time so your model will need to be in a comfortable position or able to keep very still for at least an hour, likely more.
3. Take your first instant mold plaster bandage (see Resources) and cut it to size. Dip it in the pan of water, so it is completely saturated. Once in the water, the gypsum in the bandage will mix with the water to create plaster. This plaster dries quickly, so you will need to be ready to place it as soon as you dip it.
4. Apply the bandage to your model. Smooth it into any crevices or body contours. Also smooth out any air bubbles. Repeat the wetting and application process until you have covered the entire area you wish to mold, then begin another layer. Make at least three or four layers of plaster bandages or your mold will not be strong enough to hold its shape. Allow all layers to dry completely.
5. Use sharp scissors or a plaster knife to cut the mold exactly in half for removal. Be extra careful not to cut your model. You can use more plaster bandages to put the mold halves back together once they're removed from the model, or use them as is.
Related posts
Using plaster to make custom moldsUsing plaster molds can help you make a duplicate, or even multiples, of almost any object. You can use plaster molds to make copies out of plaster as well as met...
Create personal masks with plaster and newspaper.Make a mask using a live person as a model. Use newspaper strips dipped in a plaster of Paris mixture and apply the strips to a model's face that h...
Plaster of Paris is used in a wide range of art projects.Plaster of Paris, or gypsum plaster, is a powder used in construction and in arts and crafts. When plaster of Paris is combined with water,...
Make Plaster of Paris Hand MoldsYou only need a few ingredients and tools to make plaster of Paris hand molds. These molds will be great keepsakes. They are also excellent gifts for grandparents a...
Make a custom non-toxic plaster mold to use in your clay, soap making or wax crafts. You can use nearly any solid object or a dry clay sculpture to form your mold using plaster of Paris, which is...
