Backer board provides a durable surface for grouted finishes.
Backer board is a common construction material that many contractors use to install tile to walls and floors. This material helps supply a waterproof coating over the underlying surface and provides a sturdy backing for creating the tiled surface. Although tiles usually go over backer board, some people also use this material as a substitute for gypsum board, especially in areas exposed to moisture. Hiding the backer board with grout allows you to create a surface with a faux finish, such as stucco.
Instructions
1. Check the level of the screws in the backer board by running your finger over the surface of the material. The heads of the screws should be slightly lower than the surface of the backer board, creating small dimples. Use a screwdriver to tighten any raised screws so that all the screw heads are slightly deeper than the backer board surface.
2. Tape the joints between adjoining sheets of backer board with backer board tape. Taping the joints provides a continual surface area between individual sheets.
3. Mix up the grout in a drywall pan, following the instructions on the package. Allow the mixed grout to rest for the amount of time recommended on the label. Depending on your variety of grout, the resting time may take between 10 and 45 minutes.
4. Mix the grout again. Load one edge of a drywall trowel with the grout and apply the mixture to your backer board with a sweeping motion, spreading a thin layer of grout over the surface of the board. Apply another stroke beneath the first stroke, slightly overlapping the grout. Reload your trowel as necessary. Let the first coat of grout dry.
5. Apply a second coat of grout to the backer board in the same manner. Build up the grout to create a textured stucco appearance. Depending on your personal tastes, this may take between three and five coats of grout. Let the grout dry between each coat. Paint the grout to give your wall a finished look.
Related posts
Cut your own tile and backer board to fit.Installing tile yourself is a great way to improve your home and save money. If you are installing tile with a backer board, it's essential to know work w...
Removing ceramic floor tile is one of the more difficult demolition jobs you'll ever face. Those things are set there for life, generally in mortar, and if you have to break them out with a sledge...
Tile installers cover backer board with adhesive before installing tile.A tile installer usually replaces the shower's backer board when remodeling a shower wall. The adhesive used to hold the til...
Fill in a hole in plaster board.Wallboard, or plaster board, is the most common building material for walls today. The benefits of plaster board over traditional plaster are many. It is cheaper, e...
You may paint wallboard any color.Wallboard is an interior construction material used to cover walls. Also known as gypsum wallboard and drywall paneling, wallboard is usually composed of gypsum a...