Replacing drywall is an important step when remodeling a shower.
Bathroom remodeling is one of the biggest projects that a DIYer can handle. In one small bathroom, you may have to tackle electrical, plumbing and tiling projects all at the same time. One question that many DIYers ask when performing a bathroom model is whether the drywall needs to be replaced when removing shower tiles.
About Drywall
Drywall is a construction material that has been used in both residential and commercial construction throughout the world for a number of years. The main material in drywall is gypsum, which sits between two sheets of paper. Drywall is fairly easy to cut and is lightweight. It also helps to protect buildings against fire damage by absorbing the heat from the fire.
Shower Tiles
Composed from a number of materials, including ceramic, porcelain and slate, shower tiles also come in different shapes and sizes, from small 1-by-1-inch squares all the way to irregularly shaped and polished river rocks. The tiles are usually fixed to the shower wall by tile adhesive. Once the tiles are set, grout is then pressed in between the tile spaces, which keeps the tiles bonded to each other as well as helps to hide irregularities in tile spacing.
Cement Board
Cement board is a construction material that has gradually come to replace drywall boards in wet locations such as bathrooms and kitchens. Although drywall is fire resistant, it can be damaged easily by water. A crack in a shower tile can allow water to leak through and penetrate into the drywall, causing mold and other damage. Cement board is composed of pressed cement particles that simply absorb the water without causing the board any damage.
Replacing Drywall
Before beginning the removal of the shower tiles, you need to plan on the extent of your remodeling project. If you will be reusing the shower tiles, care should be taken when removing them so they aren't damaged. Once the tiles are removed, you'll want to replace the existing drywall with cement board. If you won't reuse the shower tiles, there's no need to be careful when removing them, and you can simply knock out the wall holding the tiles with a sledgehammer.
Related posts
When a shower contains drywall, either surrounding the shower tiles or in place of shower tiles, the wall boards usually consist of a strong water-resistant material. Water-resistance, however, do...
Install new backing for shower walls if the old ones begin to sag or crumble.Cement backer boards are a type of sheetrock installed into walls with heavy water contact, such as shower stalls. This...
Drywall is a common building material used to finish home interiors.Drywall is a building material comprised of gypsum plaster between two sheets of fiberglass (or paper) matting. It is the most c...
If you have tiled drywall, and you need to remove that tile to resurface the wall, don't just start hitting at the tile with a hammer. That approach can work for floor tile, but wall tile must be...
Take your time when applying wall tiles to check that they are lined up.Ceramic tiles are used for covering walls, floors and counters. You can apply ceramic tiles to primed drywall to create a ba...
