Protect carpets to avoid getting drywall mud on them.
Joint compound, also known as drywall mud, is a wet mud-like mixture used to patch holes and seams in drywall. It dries to a hard mass. If you or your workers accidentally drop joint compound on a carpet, or track it from the workroom onto the carpet of an adjoining room, it is fairly simple to remove. However, if you do it the wrong way, you can end up with more of a mess than when you started.
Instructions
1. Let the wet joint compound dry on the carpet before you attempt to remove it. If you try to wipe it up before it is dry, it will spread the compound out and drive it deeper into the carpet. Avoid walking on it while it dries.
2. Place a newspaper over any large lumps of dried joint compound on the carpet. Step firmly on the lumps to break them up.
3. Scrape the dried joint compound that remains on the carpet fibers with a clean metal paint scraper or putty knife. Any straight-edged metal device will work, such as a spatula or butter knife. Use firms strokes and sweep side to side across the dried joint compound spot. Change directions after a few strokes by moving around the spot slightly. This motion loosens the dried joint compound from the carpet fibers. It will seem to have disappeared, but it has become dust and sunk into the carpet.
4. Affix the brush attachment to your vacuum cleaner, and vacuum the area thoroughly to remove the joint compound dust you created by scraping.
5. Repeat the scraping and vacuuming procedure until all traces of joint compound have been removed.
Related posts
Remove joint compound from clothes before it dries.After installing drywall, it is necessary to fill and tape all of the joints with joint compound. During application of drywall joint compound, i...
Drywall sheets are sealed together with tape (either paper or mesh) and joint compound, which is a form of plaster. The compound is laid over the tape in three layers, each one successively wider...
Joint compound requires preparation before painting.Joint compound repairs and fills seams and nail holes in drywall. You can also use joint compound to repair cracked or damaged walls. You apply...
New walls may crack as wall studs and ceiling trusses dry.Shrinkage cracks are common in drywall, especially in wood-frame homes. These cracks tend to appear as the lumber loses its moisture conte...
Taping out corners requires a slightly different technique.Drywall panels give your walls a smooth look, suitable for painting or for hanging wallpaper. During installation, the panels are cut and...
